Building a Beginning Billing Boats Kit, Dana Fishing Boat – Part 12: Railing and Block Choice

A twelfth installment on building the Billing Boats fishing boat Dana, by HSPMS member Clare Hess. At this point, the rigging has begun.

Ship Modeler

Topmast Backstays

If you look carefully at the plans you will see a line that runs from the top of the mainmast, down to the rail, aft of the three shrouds. This is the topmast backstay.

I’m using the next smaller size rigging line for this – as a general rule, the higher up you go on the model, the smaller the rigging line gets, at least for the standing rigging. Below is a scan of the rigging diagram. I marked the line with a red arrow.

The green arrow shows the attachment point of the stay to the rail. I believe the kit would just have you simply drill a hole here and run the line through it and glue it into place. That’s perfectly fine, but I have been adding eyebolts to the model, so that’s what I’m doing here.

The rail was drilled through, the eyebolt inserted and…

View original post 1,099 more words

1 thought on “Building a Beginning Billing Boats Kit, Dana Fishing Boat – Part 12: Railing and Block Choice

  1. Fascinated by old fishing boats as they had to endure toughweather to bring the catch home and in many countries such as UK they depended on fish as a major part of their daily diet.   Sent from Yahoo Mail on Android

Leave a Reply to Paul Boot Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s